Tel: +86-578-2857999


Home > Knowledge > Content
Precautions of suspension clamp
- Aug 14, 2018 -

Precautions of suspension clamp.png

(1) The hanging plate on the hull hanging shaft of the suspension clamp is fixed by the bolt. The bolt has a flat gasket. The gasket covers the connection part of the hanging shaft. If the gasket is not opened, it is difficult to find the hull hanging shaft. Wear condition, therefore, when checking the degree of wear of the hanging shaft, the bolt must be removed and the gasket opened. At the same time, during the inspection, special measures should be taken to prevent the lightning protection line from falling.

(2) In order to prevent the wear of the lightning protection line, the size of the suspension clamp should be selected according to the section of the lightning protection line. In the construction, the aluminum strap of the lightning protection line at the clamp is tightly packed according to the process requirements, and the lightning protection line is pressed tightly. .

(3) In the circuit design, only the load of the metal fitting is required, while the other strength parameters are not required to be inspected. Therefore, in areas with strong winds and large winds, when designing and constructing suspension clamps for line design, consideration should be given to selecting wear-resistant clamps (such as various alloys) and suspension clamps with wind-proof components.